User Manuals

2012 E-Scooter Drive Operations: See User Manual with the scooter.

2012 E-Scooter Charger Operations: See User Manual with the scooter.

2012 E-bike Drive Operations: See User Manual with the e-bike.

2012 E-bike Charger Operations: See User Manual with the e-bike.

2008-2011 Ebike Drive Operations: 1. Pedaling only, the motor will give automatic assistant. 2. Use throttle only, the ebike will go on motor's power. 3. Pedaling and using the throttle at the same time, the ebike will go faster. New disc break pads are thick and have some noise, that's normal. To best protect the battery and motor, give some pedaling when start up the bike and also give some pedalling when going uphill. After a few month you drive the e-bike, a free Frame Adjustment Service is available through our dealers. Please send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it if you need a Frame Adjustment Service.

2008-2011 Ebike Charger Operations: Turn the key of battery to the OFF position, unplug the discharge cable to the motor and connect the charger cable. Charge the battery till the charger's green light is on (MR2 need to turn the battery kay to ON position during the charging). Normally it will take 3-6 hours. It is good to charge the battery every ride. It will be no any problem occasionally unplugs the charger overnight with the green light always on. Every month the battery should be overnight charged one time. The battery should be charged on the e-bike or on the ground, not on carpet even the Lithium battery is the safest battery. When the charging is finished, the chargere's green light will always on. If after a while the chargere's red light is on again for many times, that means the battery needs an optimization. Please send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it if your battery needs a Battery Optimization Service.